Describe the work precisely
“Covering” an inflatable can refer to different jobs. The work discussed here is a tailored fabric layer over the tubes. Say whether the tubes are losing air or whether your aim is surface protection and appearance. This avoids confusing textile work with tube repair.
Length alone does not define the pattern
Two dinghies of the same length may have different tube diameters, consoles and handles. Provide bow, stern and inner-edge photographs as well as an overall view. Identify valves and lifting or towing points. An old cover is useful information, but the new fit still needs checking on the boat.
The fabric’s purpose and limits
Sailrite describes dinghy chaps as a layer over the tubes used for protection from sunlight and chafing. That layer does not change the tube’s mechanical condition. Fabric specification, performance and reinforcement should be discussed for the selected material and application.
Make regular checks practical
Understand how to remove the chaps so trapped dirt and moisture can be checked. Do not assume the same cleaning chemical suits both tube and fabric. Keeping the boat model, fitting details and material information makes future care and replacement discussions easier.
Technical reading
Material information has been checked against the technical guidance below. Follow the current technical and care instructions for the selected product. References do not imply a brand partnership.
Sailrite — Dinghy Chaps ↗LET’S MAKE IT RELEVANT TO YOUR BOAT
Dinghy Chaps
Custom fabric protection shaped around inflatable dinghy tubes, with considered access to handles, valves and existing fittings.
Service details ↗